首页 / 极空 BMS 帮助中心 / 智能主动均衡 BMS 维护说明书(英文版)

智能主动均衡 BMS 维护说明书(英文版)

极空官方资料全文,共约 41515 字。内容版权归成都极空科技有限公司所有,本站作为授权经销渠道整理提供,仅供参考,以厂家最新有效文件为准。

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. ID : JK/J.JK-BXAXSXP.09 Ver : 2. 1 2022/8/2 9 Smart BMS with Active - Balancer JK-BD6A xxS - 6P/ JK-BD6A xxS -8 P JK-BD6A xxS - 10P / JK-B D6 A xxS

- 15P JK-B D6 A xxS -20 P/ JK-B1A xxS - 15P JK-B 2 A xxS - 15P/ JK-B 2 A xxS -20 P Specification and operation manual Chengdu Jikong Technology Co., Ltd Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co.,

Ltd. Product warranty clause Name : Smart BMS with Active-Balancer Warranty period : One Year First of all, thank you for purchasing the Smart BMS with with Active Balancer from Chengdu Jikong technology co., LTD.. Chengdu Jikong technology co.,

LTD. Provides quality warranty for the hardware products and accessories sold by our company. The warranty period is as shown above. During the warranty period, the company shall have the right to choose to repair or replace the whole set of

products after receiving the notice of the product failure and verification. The whole set of replacement products may be new or close to new. 1. Chengdu jikong technology co., ltd. guarantees that the products are fully tested. 2. Chengdu jikong

technology co., LTD does not guarantee that the products can be used without interruption during the product repair process. However, the company shall ensure that faulty products are repaired within a reasonable time. 3. The warranty period

starts from the date of product delivery or the date of installation by chengdu jikong technology co., LTD. If the company's products are not installed within 30 days after the date of shipment due to the user's schedule or delay, the warranty

period of the products shall be calculated from the 31st day after the date of shipment. 4. Chengdu jikong technology co., ltd. shall not provide free warranty for any product failure or damage caused by :(a) improper use or improper maintenance;(b)

software, accessories, components or other items not provided by chengdu jikong technology co., LTD.;(c) unauthorized removal, modification and misuse;(d) use in excess of the scope specified in the technical specifications of the product;(e)

improper transport, handling and storage;(f) failure or damage caused by other non-mass causes (e.g. earthquake, war, traffic accident, etc.). To the extent permitted by law, the above warranty is the only express warranty and there are no other

warranties, whether written or oral.Expressly disclaims any implied warranty or commercial terms. Copyright statement All products sold by chengdu jikong technology co., LTD. Or software and documents sold together with the hardware products

are copyrighted by chengdu jikong technology co., LTD. Chengdu jikong technology co., LTD. All Copyrights in the products and documents are reserved by chengdu jikong technology co., LTD. The purchase of the product by the user does not represent

any license of the user with respect to copyright. Any reproduction or sale without the written permission of Chengdu- jikong technology co., LTD is prohibited.

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 1. Overview ...................................................................... 4 2. Main technical parameters .........................................................

4 2.1. Main technical indexes ...................................................... 4 2.2. Environment conditions ..................................................... 6 3. Connector and interface description ..................................................

7 3.1. Connector, LED lamp location identification ..................................... 7 3.2. Definition of connector and LED ............................................. 11 3.3. Product appearance ........................................................

13 3.4. Size .................................................................... 14 3.5. W eight .................................................................. 15 4. Installation methods and precautions ................................................

15 4.1. Out-of-box check and precautions ............................................ 15 4.2. Line connection .......................................................... 16 4.3. APP installation ..........................................................

25 5. Use and operation ............................................................... 26 5.1. Prepare and check before use ................................................ 26 5.2. Power on protection board ..................................................

26 5.3. APP Operating Instructions ................................................. 26 5.3.1. Equipment operation ..................................................................................................... 26 5.3.1.1. Device connection

.................................................. 26 5.3.1.2. Modify password and name ........................................... 27 5.3.1 Status view .....................................................................................................................

29 5.3.2 Parameter setting ............................................................................................................ 32 6. Safety protection measures and precautions ........................................... 37 7. Transportation

and storage ........................................................ 37 7.1. Transportation ............................................................ 37 7.2. S tore ................................................................... 38 Maintenance

instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 1. Overview Lithium battery smart BMS is a management system tailored for large capacity series lithium battery packs. It has the functions of voltage collection,

active balancing of large current, overcharge over-current over-temperature protection, Coulombmeter, Bluetooth communication, GPS remote and so on. It is suitable for lithium iron phosphate, lithium ternary and other battery types. The BMS relies

on our Proprietary technology for Active Balancing. Our high current active balancing technology can ensure maximum battery consistency, improve battery life, delay Battery aging. The BMS has a companion mobile APP that supports Android V. 7

and above and IOS operating systems. The APP can connect to the BMS via Bluetooth on your mobile phone to check the battery working status and to modify the working parameters of the BMS, control the charging, discharging switches, and so on.

The BMS is small in size, simple to operate and full of functions, that can be widely used in battery PACK of small sightseeing cars, walkers, shared cars, high-power storage, base station backup power, solar power stations and other products.

。 2. Main technical parameters 2.1. Main technical indexes The main technical indexes of 6p/8p/10p/15p series BMS' are shown in Table 1 and table 2. Table 1 Main technical indexes of 6p/8p series BMS Technical indicators P roduct model BD6A17S6P

BD6A20S6P BD6A24S6P BD6A17S8P BD6A20S8P BD6A24S8P Li-ion Strings 7 ~ 17 7 ~ 20 7 ~ 24 7 ~ 17 7 ~ 20 7 ~ 24 Lifepo4 S trings 8 ~ 17 8 ~ 20 8 ~ 24 8 ~ 17 8 ~ 20 8 ~ 24 LTO Strings 14~17 14 ~ 20 14 ~ 24 14 ~ 17 14 ~ 20 14 ~ 24 Balance mode Active

Balance Balance Current 0.6A Internal resistance 1.53 m Ω 1.2 m Ω Continuous discharge Current 60A 60A 60A 80A 80A 80A Continuous Charge Current 60A 60A 60A 80A 80A 80A Maximum discharge current 100A 100A 100A 150A 150A 150A Maintenance instruction

of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Over-current protection(ADJ) 10 ~ 60 A 10 ~ 60 A 10 ~ 60 A 10 ~ 80 A 10 ~ 80 A 10 ~ 80 A RS485 communication interface Yes, optional (CAN/RS485 can only be selected) CAN communication

interface Yes, optional (CAN/RS485 can only be selected) Display screen interface YES Entry cable Common Port Unit voltage range 1~5V Voltage acquisition accuracy ± 3mV Overcharge protection voltage 1.2 ~ 4.35 V adjustable Overcharge release

voltage 1.2 ~ 4.35 V adjustable Overcurrent release time 2 ~ 120s adjustable Overdischarge protection voltage 1.2 ~ 4.35 V adjustable Overdischarge recovery voltage 1.2 ~ 4.35 V adjustable Temperature detection quantity Three Temperature protection

YES Short circuit protection YES C oulombmeter YES Bluetooth function Support Android and IOS GPS (optional) Support ( RS485 And GPS One out of two) Table 2 Main technical indexes of 10 P /15 P series BMS Technical indicators P roduct model BD6A20S10P

BD6A24S10P B1A20S15P B1A24S15P B2A24S15P B2A24S20P Li-ion Strings 7 ~ 20 7 ~ 24 7 ~ 20 7 ~ 24 7 ~ 24 7 ~ 24 Lifepo4 S trings 8 ~ 20 8 ~ 24 8 ~ 20 8 ~ 24 8 ~ 24 8 ~ 24 LTO Strings 14 14 ~ 20 14 ~ 20 14 ~ 24 14 ~ 24 14 ~ 24 Balance mode 主动均衡 Balance

Current 0.6A 1A 2A Internal resistance 1 m Ω 0.65 m Ω 0.47 m Ω Continuous discharge Current 100A 150A 200A Continuous Charge Current 100A 150A 200A Maximum discharge current 200A 300A 350A Over-current protection(ADJ) 10 ~ 100A 10 ~ 150A 10 ~

200A RS485 communication interface Yes, optional (CAN/RS485 can only be selected) Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. CAN communication interface Yes, optional (CAN/RS485 can only be selected)

Display screen interface YES Entry cable Common Port Unit voltage range 1~5V Voltage acquisition accuracy ± 3mV Overcharge protection voltage 1.2 ~ 4.35 V adjustable Overcharge release voltage 1.2 ~ 4.35 V adjustable Overcurrent release time

2 ~ 120s adjustable Overdischarge protection voltage 1.2 ~ 4.35 V adjustable Overdischarge recovery voltage 1.2 ~ 4.35 V adjustable Temperature detection quantity Three Temperature protection YES Short circuit protection YES C oulombmeter YES

Bluetooth function Support Android and IOS GPS (optional) Support ( RS485 And GPS One out of two) 2.2. Environment conditions  O perating temperature range:-30 ℃ ~ 70 ℃ ;  Power supply requirements: 20~100V.  Power consumption: 8mA@100V in

equilibrium state and 7mA@100V in non-equilibrium state. Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 3. Connector and interface description 3.1. Connector, LED lamp location identification The

two BMS connectors and the position of the LED lamp are shown in Fig. 1 and Fig. 2. Fig. 1 BD 6 AxxS -10 P /B1 A xxS -15 P /B2 A xxS -15 P /B2 A xxS 20 P connector schematic diagram Fig. 2 BD6A xxS - 6P connector schematic diagram Maintenance

instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd.

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. ① :Temperature sensor ② :RS485 interface(At present, all JK BMS are configured with RS485 function by default) ③ :LCD interface(At present, all JK BMS

are configured with LCD interface by default) ④ :Heat Function interface (Only a BMS equipped with heating function can use heating interface) Description of heating function: Battery temperature is below low temperature charge protection, turn

off charging, turn on heating. Battery temperature is higher than low temperature charge recovery temperature, turn on charging, turn off heating. Cryogenic charge protection is a parameter that can be set within APP The heating power depends

on the battery voltage and the resistance value of the heating film. Battery voltage U. Heating resistance R. Power equals U*U/R Heating current I=U/R; The maximum I (current) of the board design is 3A MAX heating Power 200W (100W of B2A8S20P)

This condition must be met. ⑤ :CANBUS interface ( Needs customization) Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 3.2. Definition of connector and LED See Table 3 and table 4 for definitions

of bd6a xxS -6p / bd6a xxS -8p / bd6a xxS -10pb1a xxS -15p / b2a xxS -15p / b2a xxS 20p protection board connector and LED l ights . BD6A xxS -6P/BD6A xxS -8P/BD6A xxS -10P / BD6A xxS -1 5 P / B1A xxS -15P/B2A xxS -15P/B2A xxS 20P BMS Connector

definition, LED light definition see Table 3 Table 4 Table 3 P1~P4 Interface Definition C onnect or Interface name Pin number BD6A xxS -6P/BD6A xxS -8P/BD6A xxS -10P B1A xxS -15P/B2A xxS -15P/B2A xxS 20P N ame D efinition P1 Balance and collection

interface 1 B- Battery total negative 2 B1 Series 1 Battery Positive 3 B2 Series 1 Battery Positive 4 B3 Series 1 Battery Positive 5 B4 Series 1 Battery Positive 6 B5 Series 1 Battery Positive 7 B6 Series 1 Battery Positive 8 B7 Series 1 Battery

Positive 9 B8 Series 1 Battery Positive 10 B9 Series 1 Battery Positive 1 1 B10 Series 1 Battery Positive 12 B11 Series 1 Battery Positive 13 B12 Series 1 Battery Positive 14 B13 Series 1 Battery Positive 15 B14 Series 1 Battery Positive P2 1

B15 Series 1 Battery Positive 2 B16 Series 1 Battery Positive 3 B17 Series 1 Battery Positive 4 B18 Series 1 Battery Positive 5 B19 Series 1 Battery Positive 6 B20 Series 1 Battery Positive 7 B21 Series 1 Battery Positive 8 B22 Series 1 Battery

Positive 9 B23 Series 1 Battery Positive 10 B24 24th Series Battery Positive (Battery Total Positive) 1 1 B+ BMS power supply, connect battery P3 Temperature interface 1 T1A 1st temperature sensor A pin 2 T1B 1st temperature sensor B pin 3 T2A

2nd temperature sensor A pin 4 T2B 2nd temperature sensor B pin P4 C ommunicati on interface 1 D_N CAN_ L/RS485-N signal negative (optional function, CAN or RS485 optional) 2 D_P CAN_ H/RS485-P signal positive pole (optional function, CAN or

RS485 optional) 3 GND ground Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Table 4 P5~P7 Interface Definition C onnector Interface name Pin number BD6A xxS -6P/BD6A xxS -8P/BD6A xxS -10P B1A xxS

-15P/B2A xxS -15P/B2A xxS 20P N ame D efinition P5 GPS interface 1 VGPS Output, voltage is close to B+ 2 TX UART_TX,3.3V 3 RX UART_RX,3.3V 4 GND Power supply/signal ground P6 Display interface 1 VCC Display power output 2 A Display RS485 signal

positive 3 B Display RS485 signal negative 4 GND Negative of power supply 5 K+ Activate signal positive 6 K- Activate signal negative P7 Heating interface (optional function) 1 HT- Heating negative electrode-(BD 6A xxS -6 P / BD6A xxS -8 P does

not have this function) 2 HT- Heating negative electrode-(BD 6A xxS -6 P / BD6A xxS -8 P does not have this function) 3 HT- Heating negative electrode-(BD 6A xxS -6 P / BD6A xxS -8 P does not have this function) 4 HT- Heating negative electrode-(BD

6A xxS -6 P / BD6A xxS -8 P does not have this function) 5 HT- Heating negative electrode-(BD 6A xxS -6 P / BD6A xxS -8 P does not have this function) 6 CD+ C harging input positive-(BD 6A xxS -6P/BD 6A xxS -8P does not have this function) 7

CD- C harging input negative -(BD 6A xxS -6P/BD 6A xxS -8P does not have this function) D1 The Bluetooth connection indicator is always on when the Bluetooth is connected to the protection board, and flashes when the connection is disconnected.

C- Connect external load or negative pole of charger. B- Connect the negative electrode of the battery Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 3.3. Product appearance JK-BD6A xxS -10P 、 JK-B1A

xxS -15P 、 JK-B2A xxS -15P 、 JK-B2A xxS -20P appearance is shown in Figure 3. Figure 3. JK-BD6A xxS -10P 、 JK-B1A xxS -15P 、 JK-B2A xxS -15P 、 JK-B2A xxS -20P JK-BD6A xxS -6P 、 JK-BD6A xxS -8P appearance is shown in Figure 4.

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 4 JK-BD6A xxS -6P 、 JK-BD6A xxS -8P 3.4. Size JK-BD6A xxS -10 P / JK-B x A xxS -15 P / JK-B x A xxS -20 P series protection plate size is 162mm

× 102mm × 20.4mm, and the overall dimensions are shown in Fig ure 5. Fig ure 5 O verall dimensions of JK-BD6A xxS -10 P / JK-B x A xxS -15 P / JK-B x A xxS -20 P The protective board of JK-BD 6 xxS -6P and JK-BD 6 xxS -8P series are 136mm × 83mm

× 17.6mm in size , the overall dimensions are shown in F igure 6 .

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Fig. 6 O verall dimensions of JJK-BD6A xxS - 6P and JK-BD6A xxS -8 P series protective board 3.5. W eight  The weight of JK-BD6A xxS -6P and JK-BD6A

xxS -8P series protective board is about 257g .  The weight of JK-BD6A xxS -10P series protective board is about 360g .  The weight of JK-B1 A xxS -15P/JK-B2A xxS -15P/JK-B2A xxS -20P series protective board is about 430g . 4. Installation

methods and precautions 4.1. Out-of-box check and precautions The following are the out-of-box checks and precautions: a) The boxes, BMSs, etc. need to be handled gently and lightly, and should not be upside down as much as possible. b) Before

opening the box, pay attention to the integrity of the package, such as whether there are any impact marks, whether there are any breakage, etc. Line connection JK-BD 6AXS-10P, JK-BD 6AXS-15P, JK-BD 6AXS-20P, JK-B1A xxS -15P, JK-B2A xxS -15P

and JK-B2A xxS -20P protection board s are suitable for lithium battery packs with 7-24 strings of cells, and the wiring methods of battery packs with different number of cells are different. Maintenance instruction of Smart BMS with Active-Balancer

Chengdu Jikong Technology Co., Ltd. 4.2. Line connection JK-BD6A xxS - 10P 、 JK-BD6A xxS - 1 5 P 、 JK-BD6A xxS -2 0P 、 JK-B1A xxS - 15P 、 JK-B 2 A xxS - 15P 、 JK-B 2 A xxS -20 P For lithium-ion battery packs with 7-24 series of cells, the connection

methods for different number of cells are different. The specific connection methods are shown in the following figure. Attention: Always attach sense/balancing wire to the Positive side of the cells, Figure 7 Wiring diagram of heating function

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 8 Diagram of 24 series battery connection Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure

9 Diagram of 2 0 series battery connection Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 10 Diagram of 17 series battery connection Maintenance instruction of Smart BMS with Active-Balancer

Chengdu Jikong Technology Co., Ltd. Figure 11 Diagram of 13 series battery connection Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. JK-BD6 xxS -6P and JK-BD 6 xxS -8P For lithium-ion battery packs

with 7-24 series of cells, the connection methods for different number of cells are different. The specific connection methods are shown in the following figure. Attention: Always attach sense/balancing wire to the Positive side of the cells,

Figure 12 Diagram of 24 series battery connection Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 13 Diagram of 20 series battery connection Maintenance instruction of Smart BMS with Active-Balancer

Chengdu Jikong Technology Co., Ltd. Figure 14 Diagram of 17 series battery connection Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 15 Diagram of 13 series battery connection Maintenance

instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 4.3. APP installation Mobile APP matching the product can be obtained by scanning the QR code shown in Figure 31. Android Version 7 minimum is required for the

Android APP. Figure 16 M obile APP link QR code Download link-IOS : Search (JIKONG BMS) in the APP STORE Download link-Andriod : https:/ /www.pgyer.com/Cfq3 Instructions :

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 5. Use and operation 5.1. Prepare and check before use Before turning on the BMS, make sure that the sense/balancing lines is connected properly again,

"P-/C-" (1st Cell Negative) and "B-" (B- Negative out from the BMS) are connected correctly. Check if the BMS is securely fixed to the Cells, and make sure it is correct before it can be connected to the BMS. Otherwise, it may cause serious consequences

such as abnormal operation or even failure. 5.2. Power on protection board After confirming that the above conditions are correct, the BMS can be powered up. The BMS has no power-on control switch and is designed for charging activation mode

(charger voltage is 5V higher than battery voltage), that is, after the battery is assembled, you need to connect the charger to make the BMS work. You can also activate the BMS using the new LCD screens or Switches that come with the BMS. Another

method (without switches or LCD screen) prior to connecting the assembled battery to the system is to Connect the Positive side of the 9 volt (max) to the Negative end of the cells, the B- lead of the BMS. Then connect the Negative side of the

9 volt battery to the C-/P- lead of the BMS for one second or until you hear a Beep. It is very fast) 5.3. APP Operating Instructions 5.3.1. Equipment operation Noted: 1. For Android 12 and above systems, app needs to be allowed to obtain mobile

GPS permission, and it is always allowed. (this is the setting of Android 12 system. BMS will not always read the user's data.) 2. It is recommended that the customer update the app in time. The app will repair the bug within a week according

to the customer's feedback, and it will also be updated according to the design reasons. 5.3.1.1. Device connection First turn on the Bluetooth of the mobile phone, and then turn on the app, the app requires access to location, as shown in Figure

17 . Click the icon in the upper left corner to scan the device. After the scanning is completed, click the name of the device to be connected, such as " JK-BD6A24S10P " . During the first connection, the app will prompt you to enter a password.

The default password of the device is "1234" . After the device is connected, the app will automatically record the password. The next connection does not need to enter a password. After the app is opened, it will automatically connect. The default

BMS Password is "1234". The default BMS Password for Internal Configuration is "123456". The password input interface is shown in Figure 18 . Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure

17 Device scanning Figure 18 Password input 5.3.1.2. Modify password and name You can change the device name and password by clicking the Pen icon to the right of the device list after the device is connected. Modify the device name interface

as shown in Figure 19 . Note that the device name only supports English or numbers, not Chinese names and Chinese characters. Modify the password interface as shown in Figure 20 To change the password of the device, you must first enter the old

password of the device, and only if the current password is correct can you enter the option of entering a new password. After entering the new password twice, click OK to complete the device password change. Maintenance instruction of Smart

BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 19 Name Modification Figure 20 Password Modification

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 5.3.1 Status view The real-time status interface is shown in 21. Figure 21 Real-time status display Zone 1 in the picture is the battery comprehensive

information bar. The parameters are defined as follows: A) Runtime Running time represents the total running time from the first start of the BMS to now. B) CHARGE

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Indicates the current switch state of the BMS charging MOS. When "On" is displayed, it indicates that the current BMS charging MOS is on and the battery

is allowed to charge. When "Off" is displayed, it indicates that the current BMS charging MOS is off and the battery is not allowed to charge. C) DISCHARGE Indicates the current switch state of the BMS discharge MOS. When "On" is displayed, it

indicates that the current BMS discharge MOS is on and the battery is allowed to discharge. When "Off" is displayed, it indicates that the current BMS discharge MOS is off and the battery is not allowed to discharge. D) Balance Equilibrium represents

the switching state of the current BMS Active Balancing switch. When "On" is displayed, the BMS is automatically balancing when the balance trigger condition is reached; When "Off" is displayed, it means balancing is shutdown, and the BMS will

not balance the battery. E) Voltage The voltage voltage region shows the total voltage of the current battery in real time. The total voltage is the sum of all the individual currents. F) Current The current area shows the total current of the

current battery in real time. The current is positive when the battery is charging and negative when the battery is discharging G) Power Battery power represents the total power output or input of the current battery, which is the product of

the absolute value of the current battery voltage and current. H) Battery Capacity Represents the actual battery capacity calculated by the current BMS with high precision SOC in AH. ( This value needs the battery to do a full discharge and charge

cycle before it can be updated ). I) Remaining capacity Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Remaining capacity refers to the remaining capacity of the current battery, unit: ah. J) cycle

capacity Cycle capacity cycle capacity refers to the cumulative discharge capacity of the battery, in AH units. k)Number of cycles The number of cycles indicates the number of charging saturation times of the current battery, unit:times L) Monomer

average Indicates the average voltage of the current battery, unit: v. M) Maximum differential pressure The maximum voltage difference indicates the difference between the highest cell voltage and the lowest cell voltage of the current whole

battery, unit: v. N) balancing current When the BMS turns on the Active Balancing function and reaches the Active Balancing condition, the Active Balancing current display area displays the Active Balancing current in real time, unit: A. When

Active Balancing is in progress, the single voltage display area of the real-time state, with blue representing the highest voltage cell and red representing the lowest voltage cell. Pool. Balanced negative current indicates that the battery

is discharging, blue flashes, positive current of balanced current indicates that the battery is charging, and red flashes. The BMS uses active balancing technology. The principle of balancing is to take power from high voltage cells, store them

in the BMS, and then release them to low voltage cells. O) MOS Real time display of current BMS power MOS temperature, unit: ℃ P) Battery temperature 1 "NA" is displayed when the temperature sensor 1 is not installed, and the temperature of the

temperature sensor 1 is displayed in real time when the temperature sensor is installed in units of:. C. Q) Battery temperature 2 Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. "NA" is displayed

when the temperature sensor 2 is not installed, and the temperature of temperature sensor 2 is displayed in real time when the temperature sensor is installed in units of:> C. Zone 2 in the figure is a single voltage region. Real-time display

of voltage data for each individual in the battery pack, where red indicates the lowest voltage monomer and blue indicates the highest voltage monomer. Zone 3 in the figure is the sense/balancing lines resistance area. The sense/balancing lines

resistance is the sense/balancing lines resistance obtained by the BMS self-test. This value is only a preliminary calculation to prevent misconnection or poor contact. When the sense/balancing lines resistance exceeds a certain value, it appears

yellow, and Active Balancing cannot be turned on at this time. 5.3.2 Parameter setting Figure 22 Settings page display

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. If you need to modify the working parameters of the protection panel, you must first click the Authorization Settings button and enter the parameter

settings password. Set permissions to validate parameters. The parameter setting password factory defaults to "123456" . The parameters of the BMS can only be modified after the parameters are entered correctly and the password is set. The parameter

setting password and the device Bluetooth connection password are independent of each other. a) One-click Lifepo4 One-click Lifepo4 button can change all working parameters of the BMS to Lifepo4 battery parameters. The default values of Lifepo4

parameters are listed in the appendix. These should be adjusted for your specific battery cell specifications for proper operation. b) One-click lithium iron One-click lithium iron can modify all the working parameters of the BMS to triple battery

parameters. The default values of triple lithium parameters are listed in the appendix. These should be adjusted for your specific battery cell specifications for proper operation. c) One-click Lithium Titanate One-click Lithium Titanate, all

working parameters of the BMS can be modified to the Lithium Titanate battery parameters. The default values of the Lithium Titanate parameters are listed in the appendix. These should be adjusted for your specific battery cell specifications

for proper operation. d) Number of monomer s Number of units Indicates the number of cells in the current battery. Please set this value accurately before use, otherwise the BMS will not work properly. e) B attery capacity Battery capacity This

value is the designed capacity of the battery. f) f)Trigger Balanced Pressure Differential When the Active Balancing switch is turned on, and when the maximum voltage difference of the battery pack exceeds this value and the current monomer voltage

exceeds the balancing start voltage, Active Balancing starts until the voltage difference is lower than this value or the monomer voltage is lower than the Active Balancing start voltage. For example, set the Active Balancing trigger pressure

difference to 0.010V, start Active Balancing when the battery pack pressure difference is greater than 0.010V, and end Active Balancing when it is lower than 0.01V. (It is recommended to set the balance trigger pressure difference of 0.005V for

batteries above 50AH and 0.01V for batteries below 50AH). g) Voltage calibration Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. The voltage calibration function can be used to calibrate the accuracy

of the BMS voltage collection. When errors are found between the total voltage collected by the BMS and the total voltage of the battery, the BMS can be calibrated using the voltage calibration function. The calibration method is to get the actual

voltage from the Battery Terminals with charge / discharge OFF then enter the "actual" total battery voltage and click on the Settings button after the voltage calibration to complete the calibration. Remember to turn charge/discharge back on.

h) Current calibration The current calibration function can be used to calibrate the accuracy of current collection from the BMS. When errors are found between the total current collected by the BMS and the actual current of the battery, the

current calibration function can be used to calibrate the BMS. The calibration method is to fill in the current measured total battery current and click on the Settings button after the current calibration to complete the calibration. i) Single

Under-voltage Protection,Single Under-voltage Recovery" "Single under-voltage protection" refers to the cut-off voltage of the cells. When any single Cell within the battery pack is lower than this value, a "single under-voltage alarm" is generated,

and the BMS turns off the discharging MOS. At this time, the battery cannot be discharged and can only be charged. When the alarm is generated, only after all the individual voltage values exceed the value of "single voltage recovery", the BMS

removes the "single under-voltage alarm" and turns on the discharge MOS. j) "Monomer overcharge voltage", "monomer overcharge recovery" "Monomer overcharge voltage" refers to the saturation voltage of the battery cell. As long as the voltage

of any monomer in the battery pack exceeds this value, a' monomer overcharge alarm' will be generated. At the same time, the protection board will turn off the charging MOS, and the battery can't be charged but can only be discharged. When the

alarm is generated, only when the voltage value of all monomers is lower than the value of "monomer overcharge recovery", the protection board will release the "monomer overcharge alarm" and turn on the charging MOS at the same time. k) Auto

Shutdown Voltage The automatic shut-off voltage indicates the lowest voltage at which the BMS operates. When the lowest cell voltage in the battery pack reaches this value, the BMS shuts down. This value must be lower than "Single under-voltage

protection". l) "Maximum Charging Current " , " charging Over-current Delay" , " Charging Over-current Release " When charging the battery pack, the current exceeds the "maximum charging current" and the duration exceeds the "charging Over-current

delay", the BMS generates the "charging Over- current alarm" and turns off the charging MOS. After the alarm is generated, after the "charging Over-current relief" time, the BMS relieves the charging Over-current alarm and turns on the charging

MOS again. For example, set the "maximum charging current" to 10A, "charging Over-current delay" to 10 seconds, Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. and "charging Over-current relief" to

50 seconds. When the charging current exceeds 10A continuously for 10 seconds during the charging process, the BMS will generate a 'charging Over-current alarm', turn off the charging MOS at the same time, remove the 'charging Over-current alarm'

50 seconds after the alarm is generated, and turn on the charging MOS again . m) "Maximum D ischarge C urrent"," D ischarge O ver-current D elay"," D ischarge O ver-current R elease" When the battery pack is discharged, and the current exceeds

the "maximum discharge current" and the duration exceeds the "discharge Over-current delay", the BMS generates a "discharge Over-current alarm" and turns off the discharging MOS. After the alarm is generated, after the time of "discharge Over-current

relief", the BMS relieves the "discharge Over-current alarm" and turns on the discharge MOS again. Examples include setting maximum discharge current to 100A,'discharge Over-current delay to 10 seconds, and discharge Over-current relief' to 50

seconds. When the discharge current exceeds 100A continuously for 10 seconds during the discharge process, the BMS will produce a 'discharge Over-current alarm', turn off the discharge MOS at the same time, remove the 'discharge Over-current

alarm' 50 seconds after the alarm is generated, and turn On the discharge MOS again.. n) Short circuit protection release When the short-circuit protection occurs, the short-circuit protection is removed after the time set by `Release of Short-Circuit

Protection'. o) B alancing S tarting V oltage The balancing starting voltage is used to control the voltage stage of balancing. Balancing will be triggered when the cell voltage exceeds this value and the maximum voltage difference of the battery

pack exceeds the balancing trigger voltage difference. p) Maximum balancing current The balancing current represents the continuous current of high-voltage battery discharge and low-voltage battery charging during the process of energy transfer.

The maximum balancing current refers to the maximum current in the process of energy transfer, and the maximum balancing current should not exceed 0.1C. For example, 20Ah battery shall not exceed 20*0.1=2 A . q) "Charging over - temperature protection"

and "charging over - temperature recovery" During charging, when the battery temperature exceeds the value of "Charge Over Temperature Protection", the BMS generates a warning of "Charge Over Temperature Protection", and the BMS turns off the

charging MOS. After the alarm is generated, and the temperature falls below "Charge Over Temperature Recovery", the BMS removes the warning of "Charge Over Temperature Protection" and turns on the charging MOS again. r) "Charging low temperature

protection" and "charging low temperature recovery" During the charging process, when the battery temperature is below the value of "Charging Low Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Temperature

Protection", the BMS generates a warning of "Charging Low Temperature Protection", and the BMS turns off the charging MOS. After the alarm is generated, and the temperature is higher than "Charging Low Temperature Recovery", the BMS removes the

"Charging Low Temperature Protection" warning and restarts the charging MOS. s) "MOS over - temperature protection" and "MOS over - temperature recovery" When the MOS temperature exceeds the value of "MOS over-temperature protection", the BMS

generates a "MOS over-temperature alarm" and turns off the charging and discharging MOS at the same time, so the battery cannot be charged or discharged. After the alarm is generated, and the MOS temperature reaches lower than the value of "MOS

Over Temperature Recovery", the BMS will release the "MOS Over Temperature Alarm" and turn on the charging and discharging MOS again (the MOS Over Temperature Protection Value is 75 degrees C and the MOS Over Temperature Recovery Value is 65

degrees C, (these are the factory default values and cannot be modified). Note: Any parameter modification, please refer to the instruction manual, inappropriate parameters may make the BMS not work properly, or even damage the BMS. After any

parameter modification, you need to click on the Settings button after the parameter to complete the parameter issue. When the BMS successfully receives the parameter, it will make a "drop" sound. 5.3.3 BMS control The BMS control page is shown

in Figure 23 . The BMS control can switch the charging , discharging, and balancing functions of the BMS and restore the factory settings. Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Figure 23

BMS control page 6. Safety protection measures and precautions Please read the operation manual carefully before use, and connecting the wires according to the wiring diagram of the corresponding string number, from the negative pole to the positive

pole. After the balancing wire is connected, use a multi-meter again to confirm that it is correct before connecting the BMS. The default password of the BMS is "1234". After the mobile app is connected to the BMS, please modify the connection

password in time to prevent others from connecting. It is not allowed to refit the power line of the BMS without permission. Refitting the power line without permission will cause uneven Over-current of the BMS and damage the BMS. 7. Transportation

and storage 7.1. Transportation The packed product is not directly affected by rain or snow and is subject to severe bumps. It can be transported by normal means of transport. Corrosives such as acids and bases are not allowed to be kept together

during transportation.

Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. 7.2. S tore The packed products should be stored in a permanent warehouse with a temperature ranging from 0 35 and a relative humidity not exceeding

80%. The warehouse should be free from acid and alkali, corrosive gases, strong mechanical vibration and impact, and strong magnetic field. Maintenance instruction of Smart BMS with Active-Balancer Chengdu Jikong Technology Co., Ltd. Appendix1

Default Parameters for Lithium-Ion, Lithium Iron Phosphate, Lithium Titanate NUM PARA LI-ION LIFEPO4 LTO UNIT 1 Single under-voltage protection 2.9 2.7 1.8 V 2 Single under-voltage protection recovery 3.2 2.9 2.0 V 3 Monomer Overcharge Voltage

4.2 3.6 2.7 V 4 Monomer Overcharge Protection Recovery 4.1 3.5 2.4 V 5 Trigger Balanced Pressure Differential 0.01 0.010 0.01 V 6 Auto Shutdown Voltage 2.8 2.6 1.7 V 7 Charging Over-current Protection Delay 30 30 30 秒 8 Charging Over-current

Protection Release Time 60 60 60 秒 9 Discharge Over-current Protection Delay 30 30 30 秒 10 Discharge Over-current Protection Release Time 60 60 60 秒 11 Release time of short circuit protection 60 60 60 秒 12 Charging Over-Temperature Protection

Temperature 60 60 60 ℃ 13 Charging Over-Temperature Recovery Temperature 55 55 55 ℃ 14 Discharge Over-Temperature Protection 60 60 60 ℃ 15 Discharge Over-Temperature Recovery Temperature 55 55 55 ℃ 16 Charging Low Temperature Protection Temperature

-20 0 -20 ℃ 17 Charging Low Temperature Recovery Temperature -10 5 -10 ℃ 18 MOS Over-Temperature protection temperature 75 75 75 ℃ 19 MOS Over Temperature Protection Recovery 70 70 70 ℃